Jib cranes
Jib cranes column-wall/mounted T version
Jib cranes column-wall/mounted T version
Jib crane – Cantilever version, available models: column mounted jib crane and wall mounted jib crane.
Manual or electric traslation, trolley sliding outside the girder .
Version recommended in environments with low ceilings.
On these jib cranes can be applied different hoists: electric or pneumatic
Details
The column jib crane is the most used during industrial processing.
The column-mounted crane consists of a supporting column, this allows a high rigidity and stability of the cranes.
It is fixed to the base with a base plate and a system of bolts or by a counter-plate and chemical bolts.
This fixing to the floor with chemical bolts, needs industrial- floor (with at least 20 cm thick and 2 electro-welded nets).
It is necessary a scrupulous check of suitability with reference to type of support flooring, it must be carried by an expert technician or an engineer etc.

Wall mounted jib crane consists of a bracket support structure.
its installation is made on concrete\steel columns.
Important and necessary is check everything in relation to the type of pillar used, it must be carried by qualified expert .
Model Capacity Kg Length Standard height
Da A
GBA 63 T 63 2 5 3
GBP 63 T 63 2 5 Mensola - Wall
GBA 125 T 125 2 5 3
GBP 125 T 125 2 5 Mensola - Wall
GBA 250 T 250 2 5 3 - 3,5
GBP 250 T 250 2 5 Mensola - Wall
GBA 500 T 500 2 5 3,5
GBP 500 T 500 2 5 Mensola - Wall
GBA 1000 T 1000 4 5 3,5 - 4
GBP 1000 T 1000 4 5 Mensola - Wall
GBA 2000 T 2000 2 3 4
GBP 2000 T 2000 2 3 Mensola - Wall
Details and technical draw...
Contacts | Site map | Privacy | Using this site means you accept its Terms of Use.
Liftstyle S.r.l. Cod. Fisc. e P. IVA : 03482320235
Copyright © 2007 Liftstyle S.r.l. Tutti i diritti riservati / All Rights Reserved Aggiornato/Updated: 24-ago-2009 by LIFTSTYLE S.r.l.